General Index
Home
General Index
Home
These pumps are specially designed to handle viscous non-abrasive liquids such as motor oil, syrup, many liquid feeds and other thick heavy products. Oversize ports are 1½” FPT which provides this self priming gear pump with adequate cavity size to easily handle viscous liquids. Commonly driven directly by a 1 HP 1700 RPM Motor, they will deliver about 12 GPM. For less flow, the speed may be reduced. Includes internal relief valve. Pump construction is cast iron with steel gears and self lubricating bushings.  Approximate weight is 11#.
VIKING PUMP
1½” gear pump suitable for pumping a wide variety of liquids. They are frequently used in liquid feed applications where the product being pumped is viscous or abrasive. Low RPM design ensures long pump life and provides flow rates from 4-20 GPM depending on viscosity and pump speed. Pump construction is cast iron, with iron gears, bronze shaft and idler bushings. Packed box seal. Approximate weight is 21#
1500EP PUMPING UNIT
Pumping system suitable for bulk oil or non abrasive liquid feeds. Provides flow rate of about 12 GPM. 1½” Roper pump with 1 HP  TEFC 1800 RPM 110/120v motor mounted on base plate.
1535EP PUMPING UNIT
Pumping system suitable for bulk oil, abrasive or  viscous liquid feeds and many other industrial pumping applications. 1½” Viking HL-32-B pump with relief valve and 2 HP TEFC  1800 RPM 110/120v motor mounted on base plate with twin belt drive and guard.  Geared to pump about 20 gpm.
GORMAN-RUPP SELF-PRIMING HIGH HEAD CENTRIFUGAL PUMP
For bulk plant or other application where efficient transfer of flammable liquids such as gasoline or diesel fuel is required. 1½” and 2” pumps are close coupled to explosion proof motor providing a compact installation. 3” pump with motor combination is long coupled and mounted on solid steel mounting platform with couplings and coupling guard. Pump construction: Gray iron castings, bronze fitted, self-lubricating Viton mechanical seal. 1½” and 2” pumps have FIPT connections while the 3” pump includes 3” FIPT mating flanges. Popular pumping models are listed below, however many other pumps including the Roto-Prime self-priming pump are available. Please inquire about specifications on other Gorman-Rupp pumps.
Roper 3600 Series gear pumps are general purpose relatively low rpm pumps designed to handle thick or thin liquids.  They operate  with equal efficiency in either direction of rotation.  These pumps are ideally suited for petroleum products, liquid cattle feeds, and other viscous liquids. Available in several materials of construction. Listed here in all iron and bronze construction. With or without relief valve. Assembly for either hi or lo drive and versatile ports.
ROPER 2835 PUMP
ROPER 3600 SERIES PUMPS
Roper 3611HB
Roper 2835
Viking HL-32-B
Gorman-Rupp
Cap. At 30’ Head
Pump Only
1-Phase
3-Phase
Model
Size
HP
Dealer
List
Dealer
List
Dealer
List
81.5D3-X.75
1½"
¾
50 gpm
$1,359.90
$1,511.00
$1,392.30
$1,547.00
O2K3-X2
2”
2
130 gpm
$2,061.00
$2,290.00
$1,766.70
$1,963.00
O3C31-B-3P
3”
5
180 gpm
$4,742.10
$5,269.00
O3C31-B
3”
180 gpm
$2,860.20
$3,178.00
ROPER PUMPS
Liquid Feed or Bulk Oil Pumping Units
Model
Size
Dealer
List
ROP-3611HB
2”
$945.54
$1,050.00
ROP-3617HB
2”
$1,133.10
$1,259.00
ROP-3622HB
3”
$1,359.00
$1,510.00
Model
Size
Dealer
List
ROP-3611HBRV
2”
$1,136.50
$1,262.78
ROP-3617HBRV
2”
$1,318.50
$1,465.00
ROP-3622HBRV
3”
$1,544.40
$1,716.00
Model
Size
Description
Dealer
List
ROP-2835P
1½”
Pump with Packed Box Seal
$884.70
$983.00
ROP-2835L
1½”
Pump with Lip Seal
$823.50
$915.00
ROP-2835M
1½”
Pump with Mechanical Seal
$863.10
$959.00
Model
Size
Description
Dealer
List
VIK-HL-32-B
1½”
Pump with Relief Valve
$706.50
$785.00
Model
Size
Description
Dealer
List
LF1535EP
1½”
Pump and Motor Assembly
$1,785.50
$1,869.00
Model
Size
Description
Dealer
List
LF11500EP
1½”
Pump and Motor Assembly
$1,357.00
$1,507.00
08/21/14